| Technical Specifications |
| DSN-540 | | • | One 10GbE (XFP Copper or Fiber sold separately) |
|
| Features |
| System Memory | |
| Cache Memory | |
| Battery Backup for Cache | | • | Standard (Approximately 72 hours on full charge) |
|
| Bandwidth | |
| Operating Systems Supported | | • | Windows® Vista® 32-bit & x64 (Ultimate & Enterprise) w/Built-in iSCSI initiator | | • | Windows Server® 2003 R2 | SP1 32 & 64-bit (Standard & Enterprise) with v2.07 iSCSI initiator or later | | • | Windows Server 2008 Enterprise 32 & 64-bit with Built-in iSCSI initiator | | • | Windows XP Pro® 32 & 64-bit with v2.07 iSCSI initiator or later | | • | Windows 2000 Advanced Server – No MS iSCSI Initiator support, Qlogic HBA only | | • | Red Hat® 7.3 | | • | Red Hat Enterprise AS update 5 (64-bit) | | • | Red Hat Enterprise 5 update 2 (64-bit) | | • | SuSE Enterprise Server 10.2 32-bit | | • | Sun Solaris® 10 build 6/06 | | • | IBM AIX 5L | | • | Microsoft Hyper-V | | • | VMWare ESX Server® 3.02 & 3.5 | | • | VMWare ESX Server 4.0 | | • | Virtual Iron v4.2 | | • | Citrix XenServer® v4 | | • | Mac OS X® (10.4 & 10.5) |
|
| Supported NICs, iSCSI Accelerators and iSCSI HBAs | | • | Intel® Pro 1000MT & XT [1GbE] | | • | Intel Pro 10000 CX4 [10GbE] | | • | Myricom® 10G-PCIE-8A-C+E [10GbE] | | • | Chelsio S310X-SR-XFP [10GbE] | | • | Neterion® Xframe® II & Xframe E [10GbE] | | • | Alacritech® SES2104ET (Drivers: SNP 9.1.0.1092 & 7.3.1.0) | | • | Alacritech SES2102ET (Drivers: SNP 9.1.0.1092 & 7.3.1.0) | | • | QLogic® 4010C, 4052C, & 4062C |
|
| iSCSI Network Interface |
| Host Interface | | • | iSCSI Draft 2.0 Compliant Initiator |
|
| Connections | |
| CHAP Authentication | |
| Access Control of Management | |
| iSCSI/TCP/IP Full HW Offload | |
| Jumbo Frames Support | |
| LAG Support (Link Aggregation) | |
| VLAN Support | | • | Up to Eight 1-to-1 Mapping between IP Subnet and VLAN. Multiple VLANs per physical port with VLAN Tag (IEEE 802.1Q Tag) |
|
| Volume & RAID Support |
| RAID Controller | | • | Single- Integrated in ASIC |
|
| RAID Support | | • | RAID Levels 0, 1, 1+0 and 5
(Striped sets, mirrored sets, striped mirrored sets and parity sets) |
|
| Volumes | | • | 1,024 Virtual Volumes (256 accessible per initiator) |
|
| Target Nodes | |
| Online Capacity Expansion | |
| Hot Swappable Drives | |
| Instant Volume Access | |
| Free Space Defragmentation | |
| Auto-Detection Failed Drive | |
| Auto-Rebuild Spare Drive | |
| RAID Level Migration | |
Drive Roaming in Power Off
(configured drives are not bay-specific) | |
| Micro Rebuilds | |
| Storage Management |
| Embedded IP-Based Management GUI | | • | Create, manage, expand and monitor storage pool, volumes and RAID | | • | Event manager to view and persist events |
|
| Firmware Field Upgradeable | |
| SMI-S Version 1.1 | |
| Warranty and Support |
| Warranty | | • | 3-Year Limited (Manufacturer’s warranty on Hard Drives) |
|
| Extended Warranty | |
| Support | | • | 1 year 9 hours per day / 5 days per week Technical Support |
|
| Ordering Information |
| Part Number | |
| DSN-5410-10 | | • | xStack Storage® 1x10GbE iSCSI SAN Array, 12 Bays, 2U, w/ Primary Controller, w/o Drives, with Trays |
|
| DSN-540 | | • | xStack Storage® 1x10GbE Secondary iSCSI SAN Controller for DSN-5410-10 |
|
| DSN-5410-10-LW | | • | Extended Warranty for DSN-5410-10 |
|
| DSN-540-LW | | • | Extended Warranty for DSN-540 |
|
