The DSS-24+ 24 10/100 Mbps ports adheres to IEEE 802.3, 802.3u, and 802.3x standards, which specify 10Base-T, 100Base-TX and 100BASE-FX Ethernet technologies. With the DSS-24+ switching function, Store and Forward is implemented with Rate Adaptation Protocol. (RAP) is an end-to-end rate-based congestion control mechanism, which ensures data integrity when packets are transmitted. The switching capability of the DSS-24+ allots 256Kbytes of allocated memory buffer per 8-ports. As a result, a complete frame checking and error-filtering scheme helps prevent any packets with errors from being transmitted among any broadcast segments. The DSS-24+ also supports Backpressure and pause frame-based flow control at half duplex mode schemes to ensure zero packet loss by sending out collision signals when the port's receiving buffer is full under heavy traffic congestion.

The DSS-24+ switching function forwards data packets at wire speeds for both 10Mbps and 100Mbps. In addition, the DSS-24+ data filtering design eliminates all errors of packets at each port at wire speeds of 10Mbps and 100Mbps. As a switching solution, the DSS-24+ initiates a MAC address-learning table aging features. MAC addresses are automatically updated reducing any broadcast among network segments, which provides dynamic filtering through auto-learned MAC addresses and static filtering.

With its rack mount design and ease of installation, the DSS-24+ switch provides a cost effective way of increasing total bandwidth where network traffic is continuously increasing.