1000BASE-T SFP Transceiver
Overview
D-Links DGS-712 1000BASE-T Copper Small Form Pluggable (SFP) transceiver is based on the SFP Multi Source Agreement. It is compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802.3z and 802.3ab. The DGS-712 plugs into any standard SFP interface allowing for 1000Base-T Gigabit transmission over standard Category 5 twisted pair copper.
Specifications
| Technical Specifications | | Standard | | • | IEEE 802.3ab 1000BASE-T Gigabit Ethernet |
| | Transceiver Type | | • | SFP (Small Form Pluggable) |
| | Connector | | | Auto MDI/MDIX | | • | Automatic crossover detection enabled | | • | External crossover cable not required |
| | Data Rate | | • | 1,000 Mbps (IEEE 802.3 compatible) | | • | 10/100/1000 BASE-T operation requires the host system to have an SGMII interface with no clocks. With a SERDES interface, this transceiver will operate at 1000BASE-T only |
| | Cable Type | | • | Cat. 5 twisted-pair cable |
| | Maximum Cable Distance Coverage | | | Supply Current | | • | 350mA (typical) | | • | 400mA (maximum) | | • | 1.3W max power over full range of voltage and temperature |
| | Input Voltage | | • | 3.1V (minimum) | | • | 3.3V (typical) | | • | 3.5V (maximum) | | • | Referenced to GND |
| | Surge Current | | • | 30mA | | • | Hot plug above steady state current |
| | Operating Temperature | | • | 32° to 185° F (0° to 85° C) |
| | Storage Temperature | | • | -40° to 185° F (-40° to 85° C) |
| | Waranty | | | Ordering Information | | Part Number | | | DGS-712 | | • | 1000BASE-T Copper SFP Transceiver |
|
|
